| Část Ne | Výrobcem | Aplikace |
|---|
| AT16244F-25YC | Atmel | Fast logic 16-bit buffer/line driver, 6.0V |
| AT49LV002-70VI | Atmel | 2-Megabit (256K x 8) single 2.7-volt Battery-Voltage flash memory, 50mA active, 0.3mA standby |
| AT49LV8192T-12TC | Atmel | 8-Megabit (512K x 16) CMOS flash memory, 25mA active, 0.05mA standby |
| AT24C128T1-10TC | Atmel | 2-wire serial EEPROM 128K(16,384 x 8),1000kHz |
| AT49F1604T-90UI | Atmel | 16-Megabit (1M x 16/2M x 8) 5-volt only flash memory, 40mA active, 0.01mA standby |
| AT27BV256-15RC | Atmel | 256K (512K x 16) unregulated battery-voltage high speed OTP CMOS EPROM, 8ma active current, 0.02mA standby current |
| AT89S8252-24PI | Atmel | 8-bit microcontroller wiet 8K bytes flash,24MHz,4.0V to 6.0V |
| AT28HC64B-70SC | Atmel | 64K(8K x 8) high speed CMOS EEPROM with page write and software data protection |
| T89C51RD2-DDBC-M | Atmel | 0 to 40 MHz flash programmable 8-bit microcontroller, 80C52 compatible, 8051 pin and instruction compatible, 256 bytes RAM, EEPROM 2Kbytes, flash 64Kbytes |
| AT24C128C1-10CI-1.8 | Atmel | 2-wire serial EEPROM 128K(16,384 x 8),100kHz |
| AT89C4051-12SI | Atmel | 8-bit microcontroller with 4K bytes flash, 3.0V to 6.0V |
| AT28HC256-90DM/883 | Atmel | 256(32K x 8) high speed CMOS EPROM |
| AT89C1051-12SI | Atmel | 8-bit microcontroller with 1Kbyte flash, 2.7V to 6.0V |
| AT6002-4AC | Atmel | Coprocessor field programmable gate arrays, 5V |
| AT49LV080-20RI | Atmel | 8-Megabit (1M x 8) single 2.7-volt battery-voltage flash memory, 25mA active, 0.05mA standby |
| AT49F040-70TI | Atmel | 4-Megabit (512K x 8) 5-volt only CMOS flash memory, 50mA active, 0.3mA standby |
| AT49F4096A-70TI | Atmel | 4-Megabit (256K x 16) CMOS flash memory, 50mA active, 0.3mA standby |
| AT49HF010-55PI | Atmel | 1-Megabit (128K x 8) 5-volt only CMOS flash memory, 40mA active, 0.1mA standby |
| AT27C010L-12PI | Atmel | 1Megabit(128K x 8) OTP CMOS EPROM,25mA max |
| AT27C1024-15VI | Atmel | 1-Megabit (64K x 16) OTP EPROM |
| AT27C010-55TI | Atmel | 1Megabit(128K x 8) OTP CMOS EPROM,35mA max |
| AT28C16-15JC | Atmel | 16K(2K x 8) CMOS EEPROM, 30mA active current, 0.1mA standby current |
| AT28BV16-25JI | Atmel | 16K (2K x 8) battery-voltage CMOS EPPROM |
| AT49LV002NT-12TC | Atmel | 2-Megabit (256K x 8) single 2.7-volt Battery-Voltage flash memory, 50mA active, 0.1mA standby |
| AT49F004-90TC | Atmel | 4-Megabit (512K x 8) CMOS flash memory, 50mA active, 0.3mA standby |
| AT27BV020-15TI | Atmel | 2-Megabit (256K x 8) unregulated Battery-Voltage high speed OTP EPROM, 8mA active, 0.02mA standby, 3.6V |
| AT24C02-10MC-1.8 | Atmel | 2-wire serial EEPROM 2K(256 x 8) |
| TS68882MFB/C20 | Atmel | CMOS enhanced floating-point co-processor, 20MHz |
| AT24C32-10SC-2.5 | Atmel | 2-wire serial EEPROM 32K(4096 x 8),100kHz |
| TS68302MA16 | Atmel | Integrated multiprotocol processor (IMP), 16.67MHz |
