| Část Ne | Výrobcem | Aplikace |
|---|
| MAX6312UK39D4-T | MAXIMIC | Multiple-input, programmable reset IC(push/pull reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual-reset input). Factory-trimmed reset thresholds 3.803(min) 3.998(max). Nominal timeout period 1120ms. |
| MX7536CD | MAXIMIC | Microprocessor-compatible, 14-bit D/A converter. Accuracy +-2 LSB. |
| MAX6315US48D1-T | MAXIMIC | Open-drain microprocessor reset circuit. Reset threshold(nom) 4.80V. Reset timeout period(min) 1ms. |
| MXD1013SE045 | MAXIMIC | 3-in-1 silicon delay line. Output delay 45ns. |
| MXD1013PA012 | MAXIMIC | 3-in-1 silicon delay line. Output delay 12ns. |
| MAX6322HPUK25D-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 2.500V, reset timeout(min) 1120ms |
| MAX820REJE | MAXIMIC | Microprocessor and non-volatile metory supervisory circuit. Reset threshold 2.61V. Reset and low-line threshold accuracy +-2% |
| MAX6347XR46-T | MAXIMIC | Microprocessor supervisory circuit (reset output active-high, push-pull). Reset threshold (typ) 4.630V. Standard version. Order increment 2.5k |
| MAX2690EUB | MAXIMIC | Low-noise, 2.5GHz, downconverter mixer. |
| MAX121CAP | MAXIMIC | 308ksps ADC with DSP interface and 78dB SINAD |
| HI1-0509A-5 | MAXIMIC | Fault-protected analog 4 channel differential (2 of 8) multiplexer. |
| MAX6317HUK35DX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.500V, min reset timeout 1.12sec, typ watchdog timeout 102ms |
| ICM7218BIQI | MAXIMIC | 8 digit LED display driver |
| MX7542BQ | MAXIMIC | CMOS microprocessor-compatible 12 bit DAC. Error +1/2 LSB. |
| MAX6316MUK47AW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.700V, min reset timeout 1ms, typ watchdog timeout 6.3ms |
| MAX508AEWP | MAXIMIC | Voltage-output, 12-bit DAC with internal reference. 8+4 data-bus widths. Error +-1/2. |
| MAX4275BMEUA | MAXIMIC | Dual, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 80, 1+ (Rf/Dg) noninverting gain 81, -3dB BW 260kHz. |
| MAX704REPA | MAXIMIC | 3.0V or 3.3V microprocessor supervisory circuit. Reset threshold 2.625V. Active-low reset. Manual reset input. Backup-battery switch. Power-fail threshold accuracy +-4%. Power-fail comparator. Reset window +-75mV |
| ICM7250IPE | MAXIMIC | Programmable timer/counter |
| MAX6307UK46D2-T | MAXIMIC | Multiple-input, programmable reset IC (open-drain reset output,factory-set reset threshold on Vcc,1additional undervoltage reset input,negative/overvoltage reset inp.).Factory-trimmed reset thresholds4.514(min),4.746(max).Nominal timeout period 20ms. |
| MAX1295AEEI | MAXIMIC | 265ksps, +3V, 6-channel single-ended/3-channel pseudo-differential, 12-bit ADC with +2.5V reference and parallel interface INL(LSB) +0.5, -0.5 |
| MAX6320PUK25DZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 2.500V, reset timeout(min) 1.12sec, watchdog timeout(typ) 25.6sec |
| MAX6307UK34D3-T | MAXIMIC | Multiple-input, programmable reset IC (open-drain reset output,factory-set reset threshold on Vcc,1additional undervoltage reset input,negative/overvoltage reset inp.).Factory-trimmed reset thresholds3.315(min),3.485(max).Nominal timeout period 140ms. |
| DG390CK | MAXIMIC | General purpose CMOS dual analog switch. |
| MAX6316MUK38CW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.800V, min reset timeout 140ms, typ watchdog timeout 6.3ms |
| MAX189AEPA | MAXIMIC | +5V, low-power, 12-bit serial ADC. Error(LSB) +-1/2. |
| MAX494MJD | MAXIMIC | Quad, micropower, single-supply operation (+2.7V to +6V), Rail-to-Rail op amp. |
| ICL7641CCWE | MAXIMIC | Quad operational amplifier, 10mV |
| MAX4519CEE | MAXIMIC | Precision, dual 2-channel, low-voltage, CMOS analog multiplexer. Single-supply operation (+2.2V to +15V) or bipolar-supply operation (+-2.2V to +-8V). |
| MX580KESA | MAXIMIC | High precision +2.5V reference. Tolerance +-25mV |
