| Část Ne | Výrobcem | Aplikace |
|---|
| MAX820MEJE | MaximIC | Microprocessor and non-volatile metory supervisory circuit. Reset threshold 4.37V. Reset and low-line threshold accuracy +-2% |
| MAX8214AEPE | MaximIC | Five universal voltage monitor - complete microprocessor voltage monitoring. Active pull-up outputs. |
| MAX6379UR42-T | MaximIC | Ultra-low-power voltage detector, 4.2V |
| MAX518AESA | MaximIC | 2-wire serial 8-bit dual DAC with Rail-to-Rail outputs. TUE(LSB) 1. |
| MAX821MUS-T | MaximIC | Microprocessor voltage monitor with pin-selectable power-on reset timeout delay (1ms,max, 20ms,min or 100ms,min). Reset threshold(nom) 4.38V. Active-low reset output. |
| MAX4528CSA | MaximIC | Low-voltage, phase-reversal analog switch. |
| MAX6320PUK33DY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.300V, reset timeout(min) 1.12sec, watchdog timeout(typ) 1.6sec |
| MAX3244EEWI | MaximIC | +-15kV ESD-protected, 1microA, 1Mbps, 3.0V to 5.5V, RS-232 transceiver with autoshutdown plus. |
| MAX6310UK40D2-T | MaximIC | Multiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 3.900(min),4.100(max). Nominal timeout period 20ms. |
| MAX6320PUK49BX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.900V, reset timeout(min) 20ms, watchdog timeout(typ) 102ms |
| DG442C/D | MaximIC | Improved, quad, SPST analog switch |
| ICL7621BMTV | MaximIC | Dual operational amplifier, 5mV |
| MX7672KN10 | MaximIC | High-speed 12-bit A/D converter with external reference input. Fast conversion time 10 microsec. Linearity +-1 LSB. |
| MAX6306UK43D4-T | MaximIC | Multiple-input, programmable reset IC (open-drain reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual reset input). Factory-trimmed reset thresholds 4.193(min),4.408(max) Nominal timeout period 1120ms. |
| MAX3209ECUU | MaximIC | +-15kV ESD-protected, 12V, dual RS2342 serial port with low-power standby for motherboards/desktops. |
| MXL1076CT | MaximIC | 2A step-down, PWM, switch-mode DC-DC regulator. Adjustable output 2.5V to 35V |
| DG381AK | MaximIC | General purpose CMOS quad analog switch. |
| MAX754ESE | MaximIC | CCFL backlight and LCD contrast controller. Positive LCD contrast. |
| MAX172AING | MaximIC | Complete 10 microsec. CMOS 12-bit ADC. Error +- 1/2 LSB. |
| MAX6310UK36D4-T | MaximIC | Multiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 3.510(min),3.690(max). Nominal timeout period 1120ms. |
| MAX6315US47D3-T | MaximIC | Open-drain microprocessor reset circuit. Reset threshold(nom) 4.70V. Reset timeout period(min) 140ms. |
| DG418DK | MaximIC | Improved, SPST, NO analog switch |
| MAX6316LUK34DW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.400V, min reset timeout 1.12sec, typ watchdog timeout 6.3ms |
| MAX321EPA | MaximIC | Precision, dual-supply, SPTS analog switch. |
| MX7521LQ | MaximIC | CMOS 12 bit multiplying D/A converter. Error 0.05% |
| MAX190BEWG | MaximIC | Low-power, 12-bit sampling ADC with internal reference and power-down. Error(LSB) +-1. |
| MAX6316MUK40DW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.000V, min reset timeout 1120ms, typ watchdog timeout 6.3ms |
| MAX1294BEEI | MaximIC | 420ksps, +5V, 6-channel single-ended/3channel pseudo-differential, 12-bit ADC with +2.5V reference and parallel interface INL(LSB) +1, -1 |
| MAX6318LHUK40AX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 4.000V min, reset timeout 1ms,typ watchdog timeout 102ms |
| MAX6347UR41-T | MaximIC | Microprocessor supervisory circuit (reset output active-high, push-pull). Reset threshold (typ) 4.100V. Order increment 10k |
