| Část Ne | Výrobcem | Aplikace |
|---|
| MAX6332UR19D1-T | MaximIC | Ultra-low-voltage, low power microprocessor reset circuit. Reset threshold(typ) 1.9V, reset timeout(min) 1ms. |
| MAX6316LUK44CZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.390V, min reset timeout 140ms, typ watchdog timeout 25.6sec |
| DG202CJ | MaximIC | Quad SPST CMOS analog switch. |
| MAX665CPA | MaximIC | 8V CMOS switched-capacitor voltage converter. |
| MX7672KP05 | MaximIC | High-speed 12-bit A/D converter with external reference input. Fast conversion time 5 microsec. Linearity +-1 LSB. |
| MAX635BESA | MaximIC | Preset -5V output or adjuistable output with 2 resistors, CMOS switching regulator. Output accuracy 10%. |
| MAX4522CSE | MaximIC | Quad, low-voltage, SPST analog switch. |
| MAX6318LHUK38CW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.800V min, reset timeout 140ms,typ watchdog timeout 6.3ms |
| MAX170CCPA | MaximIC | Serial output 5.6 microsec 12-bit A/D converter. Error +-1/2 LSB. |
| MAX4529ESA | MaximIC | Low-voltage, bidirectional RF and video switch. |
| MAX693EPE | MaximIC | Microprocessor supervisory circuit. |
| MAX4664CPE | MaximIC | 5om, quad, SPST, CMOS analog switch (four NC switches). |
| MAX6375XR30-T | MaximIC | Ultra-low-power voltage detector, 3.0V |
| MX7542GKN | MaximIC | CMOS microprocessor-compatible 12 bit DAC. Error +1/2 LSB. |
| MAX1401CAI | MaximIC | +3V, 18-bit, low-power, multichannel, oversampling (sigma-delta) ADC |
| MAX6316LUK39AY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.900V, min reset timeout 1ms, typ watchdog timeout 1.6sec |
| MAX4600EPE | MaximIC | 1.25om, dual SPST, CMOS analog switch. One NC (normally closed) and one NO (normally open) switch. |
| MAX6308UK00D2-T | MaximIC | Multiple-input, programmable reset IC (push/pull reset output,2 additional undervoltage reset inputs,). Nominal timeout period 20ms. |
| MX7248AQ | MaximIC | Complete, 12-bit voltage-output DAC. |
| MAX1005EEE | MaximIC | IF undersampler |
| MAX4275BCESA | MaximIC | Dual, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 15, 1+ (Rf/Dg) noninverting gain 16, -3dB BW 390kHz. |
| MAX4505EUA | MaximIC | Fault-protected, high-voltage, signal-line protector |
| MAX6321HPUK46AX-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.630V, reset timeout(min) 1ms, watchdog timeout(typ) 102ms |
| MAX514ACWI | MaximIC | CMOS quad, 12-bit, serial-input multiplying DAC. DNL(LSBs) +-1/2. |
| MAX6316MUK34CY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.400V, min reset timeout 140ms, typ watchdog timeout 1.6sec |
| MXD1013PD070 | MaximIC | 3-in-1 silicon delay line. Output delay 70ns. |
| MAX6318LHUK42CY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 4.200V min, reset timeout 140ms,typ watchdog timeout 1.6sec |
| MAX6333UR18D2-T | MaximIC | Ultra-low-voltage, low power microprocessor reset circuit. Reset threshold(typ) 1.8V, reset timeout(min) 20ms. |
| MAX533ACPE | MaximIC | 2.7V, low-power, 8-bit quad DAC with Rail-to-Rail output buffer. INL (LSB) +-1 |
| MAX6316MUK48CX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.800V, min reset timeout 140ms, typ watchdog timeout 102ms |
