| Část Ne | Výrobcem | Aplikace |
|---|
| MAX6306UK47D4-T | MaximIC | Multiple-input, programmable reset IC (open-drain reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual reset input). Factory-trimmed reset thresholds 4.583(min),4.818(max) Nominal timeout period 1120ms. |
| MXL1001AMJ8 | MaximIC | Precision operational amplifier |
| MAX709LCUA | MaximIC | Power-supply monitor with reset. Reset threshold voltage 4.65V |
| MAX188DCAP | MaximIC | Low-power, 8-channel, serial 12-bit ADC. |
| MAX641BCSA | MaximIC | +5V fixed output, 10W CMOS step-up switching regulator. 10% output accuracy |
| MAX924ESE | MaximIC | Quad micropower, low-voltage comparator. Intarnal 1.182V+-1% voltage reference. |
| MAX3095ESE | MaximIC | +-15kV ESD-Protected, 10Mbps, 3V quad RS-422/RS-485 receiver. |
| MAX6309UK40D1-T | MaximIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,manual-reset input).Factory-trimmed reset thresholds 3.900(min),4.100(max) Nominal timeout period 1ms. |
| IH5048ACJE | MaximIC | CMOS analog switch. |
| MAX494CPD | MaximIC | Quad, micropower, single-supply operation (+2.7V to +6V), Rail-to-Rail op amp. |
| DG403CJ | MaximIC | Improved, dual, SPDT, two NO and two NC switches, high-speed analog switch. |
| MAX604CPA | MaximIC | 3.3V or adjustable, low-dropout, low quiescent currrent, 500mA linear regulator. |
| MAX6316LUK37BX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.700V, min reset timeout 20ms, typ watchdog timeout 102ms |
| DG390AC/D | MaximIC | General purpose CMOS quad analog switch. |
| MAX6321HPUK33AX-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.300V, reset timeout(min) 1ms, watchdog timeout(typ) 102ms |
| MX7524JN | MaximIC | CMOS 8-bit buffered multiplying DAC. TTL/CMOS compatible at +5V. Error +-1/2 LSB |
| MAX6319LHUK30B-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-low,push/pull and active-high, push/pull).Factory-trimmed reset threshold(typ) 3.000V, reset timeout(min) 20ms |
| MAX1649ESA | MaximIC | 5V or adjustable, high-efficiency, low-dropout, step-down DC-DC controller |
| MAX6316LUK45DZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.500V, min reset timeout 1120ms, typ watchdog timeout 25.6sec |
| MAX758ACPA | MaximIC | Adjuistable, step-down, current-mode PWM regulator. Inputs from 4V to 16V, up to 750mA load currents. |
| MAX944MJD | MaximIC | Quad, high-speed, low-power, 3V or 5V single-supply, Rail-to-Rail comparator |
| MAX814LESA | MaximIC | +-1% accuracy, low-power, microprocessor supervisory circuit. Reset trip threshold (min) 4.65V (max) 4.75V, push-pull active-low reset output, push-pull active-high reset output, manual reset, power-fail monitor, low-line detector. |
| MX7533TQ | MaximIC | CMOS low-cost 10 bit multiplying D/A converter. Error 0.1% |
| MAX3325EAI | MaximIC | 3V dual RS-232 transceiver with LCD supply and contrast controller. |
| MAX861ESA | MaximIC | 50mA, Frequency-selectable, switched-capacitor voltage coverter. Input voltage +2.5V to 5.5V |
| MAX690ACSA | MaximIC | Microprocessor supervisory circuit. 4.65V precision supply-voltage monitor |
| ICL7632EC/D | MaximIC | Triple operational amplifier, 20mV |
| MAX6315US34D4-T | MaximIC | Open-drain microprocessor reset circuit. Reset threshold(nom) 3.40V. Reset timeout period(min) 1120ms. |
| MXD1000C/D45 | MaximIC | 5-tap silicon delay line |
| MX7523JCWE | MaximIC | CMOS 8 bit multiplying D/A converter. Error 1/2LSB |
